Flooring costs move with geography — but not as much as many people assume, and rarely the way they expect.
Using a regional cost multiplier applied to national-average installed prices, this report estimates that a 1,000 sq ft vinyl plank floor runs roughly $3,280–$10,660 in the least-expensive states and about $6,000–$19,500 in the most expensive. That is a wide spread, but it comes from a modeled cost-of-living factor, not a survey of bids.
To price your own project by location, use the interactive Flooring Cost by State tool or the main calculator first — then treat this report as context for why bids vary.
Important: this is a model, not a quote collection
Every figure here is modeled: national-average material + labor ranges multiplied by a regional cost factor. We did not collect contractor quotes by state, and these numbers should not be presented as survey data. They are a planning baseline. Confirm real pricing with local written bids, and read the methodology and limitations before citing a specific dollar amount.
Key findings (modeled)
Highest cost states
- Hawaii — +50% · $6,000–$19,500 for 1,000 sq ft LVP
- California — +40% · $5,600–$18,200 for 1,000 sq ft LVP
- Alaska — +35% · $5,400–$17,550 for 1,000 sq ft LVP
Lowest cost states
- Mississippi — -18% · $3,280–$10,660 for 1,000 sq ft LVP
- West Virginia — -18% · $3,280–$10,660 for 1,000 sq ft LVP
- Alabama — -15% · $3,400–$11,050 for 1,000 sq ft LVP
Methodology
- Start with national-average installed ranges. For each flooring type we use a low and high total installed price (material + labor) per square foot from our calculator dataset, which is researched from public home-improvement sources and reviewed twice per year (most recently June 2026).
- Apply a regional cost multiplier. Each state has a single multiplier where 1.0 equals the national average. We multiply both the low and high national ranges by that factor to produce a state range.
- Report a benchmark size. The headline table uses a 1,000 sq ft project so states are directly comparable. The interactive tool lets you change square footage and material.
Example calculation
Vinyl plank national range: $4–$13/sq ft installed. For 1,000 sq ft that is $4,000–$13,000. In California (multiplier 1.40): $4,000 × 1.40 = $5,600 low; $13,000 × 1.40 = $18,200 high.
National baseline (1,000 sq ft)
The national-average installed ranges the multipliers are applied to, before any state adjustment:
| Material | Low | High | Midpoint |
|---|---|---|---|
| Vinyl Plank (LVP/LVT) | $4,000 | $13,000 | $8,500 |
| Laminate | $4,000 | $12,000 | $8,000 |
| Hardwood | $10,000 | $30,000 | $20,000 |
| Ceramic Tile | $5,000 | $16,000 | $10,500 |
National-average material + labor ranges (June 2026). Multiplier = 1.0.
Flooring cost by state — full table
Modeled range for 1,000 sq ft of vinyl plank in every state, sorted from highest to lowest multiplier. Open the interactive tool to change material and size.
| State | Multiplier | vs. national | Modeled range (1,000 sq ft LVP) |
|---|---|---|---|
| Hawaii | 1.50 | +50% | $6,000–$19,500 |
| California | 1.40 | +40% | $5,600–$18,200 |
| Alaska | 1.35 | +35% | $5,400–$17,550 |
| Massachusetts | 1.30 | +30% | $5,200–$16,900 |
| New York | 1.30 | +30% | $5,200–$16,900 |
| Connecticut | 1.25 | +25% | $5,000–$16,250 |
| New Jersey | 1.25 | +25% | $5,000–$16,250 |
| Rhode Island | 1.20 | +20% | $4,800–$15,600 |
| Washington | 1.20 | +20% | $4,800–$15,600 |
| Maryland | 1.15 | +15% | $4,600–$14,950 |
| New Hampshire | 1.15 | +15% | $4,600–$14,950 |
| Colorado | 1.10 | +10% | $4,400–$14,300 |
| Oregon | 1.10 | +10% | $4,400–$14,300 |
| Vermont | 1.10 | +10% | $4,400–$14,300 |
| Arizona | 1.05 | +5% | $4,200–$13,650 |
| Delaware | 1.05 | +5% | $4,200–$13,650 |
| Illinois | 1.05 | +5% | $4,200–$13,650 |
| Maine | 1.05 | +5% | $4,200–$13,650 |
| Minnesota | 1.05 | +5% | $4,200–$13,650 |
| Nevada | 1.05 | +5% | $4,200–$13,650 |
| Pennsylvania | 1.05 | +5% | $4,200–$13,650 |
| Virginia | 1.00 | national avg | $4,000–$13,000 |
| Utah | 0.98 | -2% | $3,920–$12,740 |
| Florida | 0.95 | -5% | $3,800–$12,350 |
| Idaho | 0.95 | -5% | $3,800–$12,350 |
| Michigan | 0.95 | -5% | $3,800–$12,350 |
| Montana | 0.95 | -5% | $3,800–$12,350 |
| Wisconsin | 0.95 | -5% | $3,800–$12,350 |
| Wyoming | 0.95 | -5% | $3,800–$12,350 |
| North Dakota | 0.92 | -8% | $3,680–$11,960 |
| Texas | 0.92 | -8% | $3,680–$11,960 |
| Georgia | 0.90 | -10% | $3,600–$11,700 |
| Indiana | 0.90 | -10% | $3,600–$11,700 |
| New Mexico | 0.90 | -10% | $3,600–$11,700 |
| Ohio | 0.90 | -10% | $3,600–$11,700 |
| Iowa | 0.88 | -12% | $3,520–$11,440 |
| Kansas | 0.88 | -12% | $3,520–$11,440 |
| Louisiana | 0.88 | -12% | $3,520–$11,440 |
| Missouri | 0.88 | -12% | $3,520–$11,440 |
| Nebraska | 0.88 | -12% | $3,520–$11,440 |
| North Carolina | 0.88 | -12% | $3,520–$11,440 |
| South Dakota | 0.88 | -12% | $3,520–$11,440 |
| Alabama | 0.85 | -15% | $3,400–$11,050 |
| Arkansas | 0.85 | -15% | $3,400–$11,050 |
| Kentucky | 0.85 | -15% | $3,400–$11,050 |
| Oklahoma | 0.85 | -15% | $3,400–$11,050 |
| South Carolina | 0.85 | -15% | $3,400–$11,050 |
| Tennessee | 0.85 | -15% | $3,400–$11,050 |
| Mississippi | 0.82 | -18% | $3,280–$10,660 |
| West Virginia | 0.82 | -18% | $3,280–$10,660 |
Modeled figures = national-average LVP range ($4–$13/sq ft) × state multiplier. Not collected quotes.
Regional summary
| Region | States | Avg. multiplier | vs. national |
|---|---|---|---|
| Northeast | 9 | 1.18 | +18% |
| Midwest | 12 | 0.93 | -7% |
| South | 16 | 0.90 | -10% |
| West | 13 | 1.11 | +11% |
Limitations
- Modeled, not surveyed. These figures come from a multiplier applied to national averages. They describe broad regional differences, not specific local prices.
- Within-state variation is large. A single state can swing roughly ±15% by city, contractor availability and project complexity. Rural and metro pricing often differ widely.
- One multiplier, not material-specific. The factor applies to total installed cost and does not separately model labor vs. material differences by region.
- Excludes extras. Removal, subfloor prep, transitions, trim, stairs and haul-away are not included. See charges commonly missing from estimates.
- Point-in-time. Pricing base reviewed June 2026; report reviewed July 2026. Material and labor markets shift between reviews.
Price your own state
Adjust the numbers for your project.
Change the material, square footage and state in the interactive tool to get a localized range, then check any quote against fair-price ranges.
Cite and share this report
You are welcome to reference or link to this report with attribution to CalculateFlooring. Please cite it as a modeled estimate, not as collected contractor quotes, and link to this page as the source.
Want to feature localized cost data alongside your own content? Link to the interactive state pricing tool with attribution to CalculateFlooring.
Frequently asked questions
Is this flooring cost by state report based on real contractor quotes?
No. This report is a transparent multiplier model, not a survey of contractor quotes. We take national-average installed price ranges (material + labor) and adjust them with a regional cost factor for each state. It shows broad regional differences, not specific local pricing.
How are the state flooring costs calculated?
For each state, the national-average low and high installed price for a flooring type is multiplied by that state's regional cost multiplier. A 1.0 multiplier equals the national average. Hawaii's 1.50 multiplier means modeled costs run about 50% above national; Mississippi's 0.82 means about 18% below.
How accurate are these state flooring estimates?
They are directional, not exact. Prices can vary by about ±15% within a single state depending on the city, contractor availability, material selection and project complexity. Treat these figures as a planning baseline and confirm with local written bids.
Where do the multipliers come from?
The regional cost factors are based on U.S. Bureau of Labor Statistics regional price parities (2025) and cross-referenced with CostPrism's state-by-state flooring data (2026). The national-average material and labor ranges are reviewed twice per year; the most recent review was June 2026.
Sources & review: National-average material + labor ranges from the calculator dataset (HomeGuide, Homewyse, HomeAdvisor, FlooringClarity, BhumiCalculator, This Old House, Home Depot, Angi), reviewed June 2026. Regional cost multipliers based on U.S. Bureau of Labor Statistics regional price parities (2025) and CostPrism state-by-state flooring data (2026). This report was reviewed July 2026. Disclaimer: All figures are modeled estimates for planning only and are not quotes. Confirm pricing with local written bids.