100 Sq Ft Engineered Hardwood Flooring Cost
100 square feet of engineered hardwood flooring costs $700–$1,900 installed in 2026. See the per-square-foot average, materials, labor, waste, and removal breakdown.
Total Installed Cost
$700 – $1,900
Average: $1,300 ($13/sqft)
For 100 sq ft — about a small bathroom or walk-in closet
Shopping list: ≈5 boxes (110 sq ft including 10% waste)
Got a contractor quote? See how it compares to real 2026 pricing.
Key Takeaways
Average Cost
$1,300
Cost Range
$700 – $1,900
Per Sq Ft
$13/sqft
Waste Factor
10% (10 sqft extra)
Engineered Hardwood Cost Breakdown for 100 Sq Ft
Materials
$4–$13/sqft × 100 sq ft (net floor area)
$400 – $1,300
Labor / Installation
$3–$6/sqft × 100 sq ft
$300 – $600
Waste Factor
10% extra material = 10 additional sq ft
+10 sq ft
Total Project Cost
$700 – $1,900
What 100 Sq Ft of Engineered Hardwood Means in Practice
100 square feet covers a small bathroom or walk-in closet — this is a single-room refresh. At this size the job is a single-room refresh: minimal furniture to move, one focused work zone, and many crews can finish in a single day. Buy one or two extra boxes beyond the calculated quantity so future repairs match the same dye lot.
Rooms this job usually touches
- • the main space
- • one closet or transition strip
Planning checklist for a single-room refresh
- • Clear the room the night before — small items, electronics, and anything breakable.
- • Keep one spare box from the same dye lot for future repairs.
- • Check the subfloor while the room is empty; a soft sheet now saves a callback later.
- • One work day is realistic for most materials at this size.
Material to buy
110 sq ft ≈ 5 boxes
Includes the 10% cutting waste factor; whole-box rounding adds a small spare buffer (25 sq ft/box).
Typical install labor
100 sq ft is roughly 1 crew-day of installation labor.
A typical two-person crew lays about 300–400 sq ft of this material per day,.
Schedule reality
Engineered boards are more dimensionally stable, but many manufacturers still ask for 48–72 hours of on-site acclimation before install.
Comparing sizes? At 100 sq ft the price per square foot stays in the $7–$19 installed range, but the project logistics above change more than the math does — a 300 sq ft bedroom job and a 100 sq ft single-room refresh are different animals even at the same rate.
About Engineered Hardwood
Real wood veneer over plywood base. More stable than solid hardwood.
✅ Pros
- • Dimensionally stable
- • Can go below grade
- • DIY-friendly click options
⚠️ Cons
- • Thin wear layer
- • Limited refinishing
- • Still moisture-sensitive
Ready for a real number?
Calculate your full Engineered Hardwood flooring cost
You've seen the typical range above. Run your exact square footage through the full calculator to break down materials, labor, and waste — free, no signup.
11 flooring types
instant cost estimates
2026 national pricing data
All Flooring Costs for 100 Sq Ft
Compare every flooring type for the same square footage:
| Flooring Type | Cost/Sq Ft | Total Low | Total High | Average |
|---|---|---|---|---|
| 🧶 Carpet | $3–$11 | $300 | $1,100 | $700 |
| ✨ Epoxy Coating | $3–$12 | $300 | $1,200 | $750 |
| 📏 Laminate | $4–$12 | $400 | $1,200 | $800 |
| 🔷 Vinyl Plank (LVP/LVT) | $4–$13 | $400 | $1,300 | $850 |
| 🪵 Cork | $6–$13 | $600 | $1,300 | $950 |
| ⬜ Ceramic Tile | $5–$16 | $500 | $1,600 | $1,050 |
| 🎋 Bamboo | $7–$16 | $700 | $1,600 | $1,150 |
| 🌲 Engineered Hardwood ● | $7–$19 | $700 | $1,900 | $1,300 |
| 🔲 Porcelain Tile | $7–$25 | $700 | $2,500 | $1,600 |
| 🪵 Hardwood | $10–$30 | $1,000 | $3,000 | $2,000 |
| 🪨 Natural Stone | $11–$45 | $1,100 | $4,500 | $2,800 |
Frequently Asked Questions
How much does 100 sq ft of engineered hardwood cost?
100 square feet of engineered hardwood flooring costs between $700 and $1,900 installed, with a national average of $1,300 ($13/sqft including material and labor). This covers a small bathroom or walk-in closet.
What is the cost per square foot for engineered hardwood?
The average installed cost of engineered hardwood is $13 per square foot, ranging from $7 to $19 per square foot. Material alone costs $4–$13/sqft, with labor typically $3–$6/sqft — so material + labor matches the installed range above.
How much extra material should I buy for 100 sq ft?
For 100 square feet, purchase approximately 110 square feet of engineered hardwood material. This includes a 10% waste factor for cuts and mistakes (10 sq ft extra). That works out to roughly 5 boxes/cartons (at ~25 sq ft per box) — rounding up to whole boxes gives you a small spare buffer.
How long does it take to install 100 sq ft of engineered hardwood?
A typical two-person crew lays about 300–400 sq ft of this material per day, so 100 sq ft is roughly 1 crew-day of installation labor. Engineered boards are more dimensionally stable, but many manufacturers still ask for 48–72 hours of on-site acclimation before install. At this size — a small bathroom or walk-in closet — plan the single-room refresh around furniture moving and room sequencing, not just the flooring itself.
🌲 Engineered Hardwood Cost by Room Size
Other Flooring Options for 100 Sq Ft
Engineered Hardwood Guides & Deep Dives
Cost & Buying Guides
Best Flooring by Room
Need a Custom Estimate?
Use our full interactive calculator for multi-room projects, custom pricing, and detailed breakdowns.
Open Flooring Calculator →Top 3 Engineered Hardwood Products
Best-Selling Engineered Hardwood — Budget, Mid-Range & Premium
The three products flooring pros recommend most, from budget-friendly to premium. Prices are material-only — installation is extra.
Home Decorators Collection
Charlton Oak Engineered
Home Depot's house brand. 3/8" engineered with 2mm real oak wear layer. Click-lock installation makes it DIY-friendly. Good dimensional stability for basements and below-grade rooms.
Mohawk
RevWood SolidTech
Mohawk's engineered flagship. 3/4" thick with thick 3mm sawn wear layer — can be refinished once. Ultra-durable finish with HydroEdge moisture protection. Wide plank styles available.
Kährs
European Oak Collection
Swedish craftsmanship since 1857. Kährs invented engineered wood flooring. European white oak top layer, 5" wide planks, multi-layer construction with 4mm wear layer. Can be refinished 2-3 times.
Product recommendations based on expert reviews, sales volume, and contractor consensus (2026). Prices reflect national averages and may vary by location and promotions. We may earn a commission from qualifying purchases.
Pricing data from HomeGuide, Homewyse, HomeAdvisor, Angi, and FlooringClarity (2026 national averages). Actual costs vary by region, material grade, and project complexity.